Dog Containment System Above Ground Installation

At DogContainmentSystem-4Less, we deliver only the best line of cost-effective and result-oriented electronic dog containment system products to our valued customers. We are proud to introduce a highly innovative dog containment system that will give dog owners a total ease in “Underground Fencing” and dog containment installation.

Underground Containment Systems do not necessarily require dog owners to bury the wire “underground”. Although it is recommended, to avoid other problems in the future, there are still other ways to deal with this dog containment installation.

For those renting a house and digging is not an option, and for those who simply do not have the equipment for digging, here’s an interesting and truly helpful dog containment system especially created for any needs.

Our Underground Fence will make things easier for dog owners. With the use of wire securing staples, all dog owners have to do is to lay the wire down and wait for it sink after a good rain. After that, dog owners won't have to deal with the wire ever again. Isn’t this above ground installation a perfect hassle free solution to installation difficulties?

 

Step 1:

» First lay out the boundary wire in the desired shape and around the area dog owners want to contain. From the boundary wire run twisted wire to the transmitter and pug it in.
» Once dog owners have decide the system dog owners chose is correct for dog owners, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if dog owners have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of the boundary and "Staple" it to the ground. Repeat this step for all corners of the boundary. (Not all yards are square if dog owners do not have corners on the boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for dog owners and the guests.

A lot of dog owners can greatly benefit from this electronic dog containment system. With the above ground installation, this product can easily be set-up and operated.

 

 

View Cart Checkout
0 items in your cart
 

 Shipping 0.00
 Total 0.00

Image(s) may not reflect the product(s) being sold.

New Customer Service Hours:
Mon - Th: 9:00am - 10:00pm EST
Fri-Sun: 9:00am - 7:00pm EST
If you have any questions just give us a call: